IJIMT 2013 Vol.4(6): 589-593 ISSN: 2010-0248
DOI: 10.7763/IJIMT.2013.V4.467

The Development of Eccentric Press Tool with Motor Drive for Increasing the Added Value Business of Kerosene Stove Builders

Zulhendri, Aidil Zamri, Yuliarman, and Yusri
Abstract— One way to increase the value-added business kerosene stove makers is making other products than making kerosene stoves that use basic materials such as metal plate of kerosene stove material. At the beginning of the study, manual Press Tool device has been designed and made to produce the ring plate with manual drive. The manual Press Tool has the disadvantage of low production levels with only two products per minute in average. Therefore, it is now being designed and made Press Tool with motor drive to produce an average of 25 products per minute. The tool which is being developed is not only able to make a ring plate but also other products such as ornamental trellis. Another advantages of this device, comparing to other similar tools, is the design which is much simpler and only requires lower cost of production so that the tool is able to be purchased by the domestic industry.

Index Terms— Press tool, added value, kerosene stove, ring plate.

The authors are with Mechanical Engineering Department Padang State Polytechnic, Indonesia (e-mail: zulhendri_05@yahoo.co.id).

[PDF]

Cite: Zulhendri, Aidil Zamri, Yuliarman, and Yusri, " The Development of Eccentric Press Tool with Motor Drive for Increasing the Added Value Business of Kerosene Stove Builders," International Journal of Innovation, Management and Technology vol. 4, no. 6, pp. 589-593, 2013.

Copyright © 2008-2015. International Journal of Innovation, Management and Technology. All rights reserved.
E-mail: ijimt@ejournal.net